LNC2 tail pipe support

Submitted by Anonymous on

Forums: 

From: Tim Jørgensen <tj [at] yacht-pool.dk>
Sender: <marv [at] lancaironline.net>
Subject: LNC2 tail pipe support
Date: Mon, 29 Sep 2014 07:17:07 -0400
To: <lml [at] lancaironline.net>
A good while ago, somebody posted a photo of a very
elegant milled bracket, that fit around both tail pipes with a center bolt for
support.
 
Are those available somewhere?
 
 
Tim Jorgensen
360MKIIOB

LNC2 tail pipe support

Submitted by Anonymous on

From: Greenbacks, UnLtd. <n4zq [at] verizon.net>
Subject: LNC2 tail pipe support
Date: Tue, 30 Sep 2014 13:34:59 -0400
To: <tj [at] yacht-pool.dk>
Cc: Lancair Mailing List <lml [at] lancaironline.net>
Message Header


Undecoded Message

Hi Tim,



I came up with an alternative solution that solved my problem nicely.

Your main issue is that the tail pipes are not parallel to each other either horizontally or vertically and of course,

every LNC2 exhaust system is unique.

I’ll post some pics of my support over on the Lancairtalk.net site.



Angier Ames

N4ZQ

149hrs