TIT bung

Submitted by Anonymous on

Forums: 

From: jwilless [at] itd-nc.com <jwilless [at] itd-nc.com>
Sender: <marv [at] lancaironline.net>
Subject: TIT bung
Date: Tue, 07 Oct 2014 08:55:22 -0400
To: <lml [at] lancaironline.net>
Does anyone know the size of the TIT probe bung on the TSIO-550 turbo manifold?

--

Thanks, Justin

TIT bung

Submitted by Anonymous on

From: Neal George <ngeorge [at] continentalmotors.aero>
Sender: <marv [at] lancaironline.net>
Subject: RE: [LML] TIT bung
Date: Tue, 07 Oct 2014 16:46:30 -0400
To: <lml [at] lancaironline.net>
Message Header


Undecoded Message

Justin –

TIT bosses are tapped for 0.125-27 NPTF.

 

Neal

 

From: Lancair
Mailing List [lml [at] lancaironline.net]">mailto:lml [at] lancaironline.net] On Behalf Of jwilless [at] itd-nc.com

Sent: Tuesday, October 07, 2014 7:55 AM

To: Lancair Mailing List

Subject: [LML] TIT bung

 

Does anyone know the size of the TIT probe bung on the TSIO-550 turbo manifold?

 

--

Thanks, Justin

TIT bung

Submitted by Anonymous on

From: John B <2thman1 [at] gmail.com>
Sender: <marv [at] lancaironline.net>
Subject: Re: [LML] TIT bung
Date: Tue, 07 Oct 2014 16:46:54 -0400
To: <lml [at] lancaironline.net>
Message Header


Undecoded Message
Justin,

The answer is complicated and variable depending upon what instruments pick up the data and where the turbo charger came from.  If it's a stock continental it might be good to start with Neal George.  If it's a built up engine I would take lots of photos and communicate with the avionics people who made your sensors for TIT.  They will generally supply the replacement.

You may be able remove the TIT and take the nut/ferrule assembly off.  Take the nut to the hardware store and trial fit it to their sample board.  The bungs are all NPT thread I think.

John Barrett

Sent from my iPad


On Oct 7, 2014, at 5:55 AM, "jwilless [at] itd-nc.com

" <jwilless [at] itd-nc.com

> wrote:

Does anyone know the size of the TIT probe bung on the TSIO-550 turbo manifold?

--

Thanks, Justin

TIT bung

Submitted by Anonymous on

From: Robert R Pastusek <rpastusek [at] htii.com>
Subject: RE: [LML] Re: TIT bung
Date: Wed, 8 Oct 2014 12:43:34 +0000
To: Lancair Mailing List <lml [at] lancaironline.net>
Message Header


Undecoded Message

Neal,

Apparently these are not all “standard.” Mine are

 

From: Lancair
Mailing List [lml [at] lancaironline.net]">mailto:lml [at] lancaironline.net] On Behalf Of Neal George

Sent: Tuesday, October 07, 2014 4:47 PM

To: Lancair Mailing List

Subject: [LML] Re: TIT bung

 

Justin –

TIT bosses are tapped for 0.125-27 NPTF.

 

Neal

 

From:
Lancair Mailing List [lml [at] lancaironline.net (mailto:)

]
On Behalf Of jwilless [at] itd-nc.com



Sent: Tuesday, October 07, 2014 7:55 AM

To: Lancair Mailing List

Subject: [LML] TIT bung

 

Does anyone know the size of the TIT probe bung on the TSIO-550 turbo manifold?

 

--

Thanks, Justin

TIT bung

Submitted by Anonymous on

From: Robert R Pastusek <rpastusek [at] htii.com>
Subject: RE: [LML] Re: TIT bung
Date: Wed, 8 Oct 2014 12:45:44 +0000
To: Lancair Mailing List <lml [at] lancaironline.net>
Message Header


Undecoded Message

Please disregard my last message on this. It was intended to be a personal email.

Thanks,

Bob

 

From: Robert
R Pastusek

Sent: Wednesday, October 08, 2014 8:43 AM

To: 'Lancair Mailing List'

Subject: RE: [LML] Re: TIT bung

 

Neal,

Apparently these are not all “standard.” Mine are

 

From:
Lancair Mailing List [lml [at] lancaironline.net (mailto:)

]
On Behalf Of Neal George

Sent: Tuesday, October 07, 2014 4:47 PM

To: Lancair Mailing List

Subject: [LML] Re: TIT bung

 

Justin –

TIT bosses are tapped for 0.125-27 NPTF.

 

Neal

 

From:
Lancair Mailing List [lml [at] lancaironline.net (mailto:)

]
On Behalf Of jwilless [at] itd-nc.com



Sent: Tuesday, October 07, 2014 7:55 AM

To: Lancair Mailing List

Subject: [LML] TIT bung

 

Does anyone know the size of the TIT probe bung on the TSIO-550 turbo manifold?

 

--

Thanks, Justin